Just another Moderator
Join Date: Sep 2005
Location: New Westminster, BC
Thanked 457 Times in 434 Posts
Rep Power: 10
Re: Building bulkhead mounted table
Actually with a level in hand i measured 41 1/8, so there is some room for error.
Having said that the mast did obstruct a clean line of design, so some thought will have to take place.
Oh.. that sounds good then, I'd have guessed less.
I suppose another plus of moving that 40" ten to twelve inches forward will give more move-around room aft of the table...
1984 Fast/Nicholson 345 "FastForward"
".. there is much you could do at sea with common sense.. and very little you could do without it.."
Capt G E Ericson (from "The Cruel Sea" by Nicholas Monsarrat)