SailNet Community - View Single Post - Hardware Store Epoxy?
View Single Post
  #8  
Old 11-20-2012
overbored's Avatar
overbored overbored is offline
Senior Member
 
Join Date: Oct 2010
Location: Dana Point, Ca
Posts: 946
Thanks: 1
Thanked 35 Times in 35 Posts
Rep Power: 4
overbored is on a distinguished road
Re: Hardware Store Epoxy?

is it a locker drain hole or it had a bracket mounted on the inside of the locker at one time. most any thickened epoxy can be used to fill the hole, the issue with epoxy is the UV exposure. it will turn color and degrade in time. it will not match the gelcoat if that is what you have on the surface. if it is gelcoat then you could use a gelcoat repair kit and fill the hole with the matching color.
__________________
"FULL TILT" SOVEREL 33
"GOLD RUSH" PRINDLE 16
Reply With Quote Share with Facebook