Originally Posted by blt2ski
just checking in before going to sleep, I'll see if I can find a pic of how I do this from a wrap standpoint, or Ishould be back a the boat tomorrow sunday, I'll see if I can get a pic to show how. Takes four beiners around the harness. One in the front, back and ea side.
Very few climbing harnesses have gear loops that are rated for full weight! Be very careful that you are using one of those if you are doing it this way! Most harnesses the only loop rated for human weight is the belay loop.
Incase it wasn't clear, using a gear loop on your "typical" climbing harness will result in failure if you load it with human load (eventually of not immediately).