Join Date: Nov 2012
Thanked 0 Times in 0 Posts
Rep Power: 0
Re: Installed a helix mooring anchor last weekend...
Re: "...using a nylon rode from the eye of the anchor to the buoy and a slightly longer chain as back-up.
I would have preferred a bungee rode but was quoted about $1000 so I'll see how this set-up works for a while".
A thousand dollars ($1,000) seems like too much 'profit' for some good quality tested rubber extrusion with attached fittings.
Can anyone assist with a more reasonable source of rubber (bungee type) mooring rode that can replace the use of chain for a permanent mooring?