Join Date: Jan 2008
Location: Seal Harbor, Maine
Thanked 21 Times in 20 Posts
Rep Power: 8
Re: Low buck projects- Let's see 'em!
It is the original tiller's fitting. I just removed the wooden tiller and bolted on the piece of pipe. It took two measured taps with a 4 pound hammer to flatten it where necessary. The wooden tiller is resting in the shed.
The wheel was an "upgrade" by a po. Thankfully the original tiller stayed with the boat.
Last edited by downeast450; 11-29-2012 at 11:04 AM.