Join Date: Oct 2007
Location: Slidell, Louisiana
Thanked 1 Time in 1 Post
Rep Power: 0
Re: Retrofitting Tiller to Wheel Steering
The pedestal and wheel are mounted. I installed some new cable on the chain and now I'm ready to mount the idler pulleys to direct the cable onto the drive wheel.
At this point I am considering removing the lazarette/seat and extending the floor behind the wheel. There is very little storage there anyway because of the way the back of the boat sweeps up and there is good access to that area from the other two seats. A few pics attached of what I have so far...