SailNet Community - View Single Post - Bright work buffer
View Single Post
Old 12-07-2012
Tim R.'s Avatar
Tim R. Tim R. is offline
Senior Member
Join Date: Mar 2003
Location: Portland, Maine
Posts: 1,542
Thanks: 1
Thanked 27 Times in 26 Posts
Rep Power: 12
Tim R. is on a distinguished road
Re: Bright work buffer

Originally Posted by chef2sail View Post
I have a Minkota 9227 buffer with 7 and 9 inch wheels. I bought it for work on compounding the hull primarily per a recommendation from Mainsail. It has an easi;y adjustable control for the rpm and erogonmically is easy on the hands.

We redid our cockpit table 3 years ago. Stripped it with Circa 1850 varnish stripper before sanding in an outside garage using water color paint brushes to get into the small areas like the cup holders. I wound up using a dremel for the areas I couldnt get the buffer into.

Home Depot sells this
Circa 1850 Furniture Stripper

I did go for the eppifanes gloss varnish and a clear poly coat on top. After 3 years still looks like the dat we did it. Shows you how much the UV destrpyed things as ours is under the bimini at the steering pedestal protected.

Dave, I think you mean Makita 9227. Minkota makes electric trolling motors.
Tim R.
Out cruising
1997 Caliber 40LRC

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Reply With Quote Share with Facebook