SailNet Community - View Single Post - Surveying a Freedom 36/38
View Single Post
post #3 of Old 12-13-2012
amarinesurveyor
Member
 
Join Date: Feb 2009
Location: Jupiter, FL
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 7
 
Re: Surveying a Freedom 36/38

The Freedom 38 is a nice boat, the hull is balsa cored as is the deck, the surveyor should tap the entire hull and deck with his hammer and use a moisture meter to check for moisture. I have friends that have a 38 and they have had no problems with their hull, deck or mast. Tillotson Pearson did a good job building the hull and deck and I'm not sure but I think they may have built the mast also. Good luck with your purchase.
Brian
amarinesurveyor is offline  
Quote Share with Facebook
 
 
For the best viewing experience please update your browser to Google Chrome