SailNet Community - View Single Post - I would kill for flexible sander!!Argh...
View Single Post
  #4  
Old 12-14-2012
paulk's Avatar
paulk paulk is offline
Senior Member
 
Join Date: Jun 2000
Location: CT/ Long Island Sound
Posts: 2,533
Thanks: 4
Thanked 20 Times in 19 Posts
Rep Power: 15
paulk is on a distinguished road
Re: I would kill for flexible sander!!Argh...

People usually make their own sanding boards for hulls that big. Quarter inch plywood with a handle at each end, and sandpaper glued to the flat side. Four foot lengths might be a bit much for one person to handle; two or three foot lengths might be more manageable. Two guys could work together with an 8'x6" sanding board, and should be able to fair a good bit of planking in a couple of hours. Just make sure the guy calling the curve can see straight, and that the other guy knows who's in charge.
Reply With Quote Share with Facebook