Re: Standard Horizon WS100
Originally Posted by xort
Half way thru; got up the mast today and pulled the arm and ran all the calibrations after clean and lube. Looking for another nice day to get back up.
Hope this works!
Hopefully that will do it for you for awhile. On our boat it's usually about a two year cycle. (In fact, I have a replacement wand/spindle assembly and when the one in place goes south, I pull the display and linearize and calibrate the spare and take it aloft to swap with the dysfunctional wand which, after cleaning, becomes the spare.) N'any case, Good Luck!
"It is not so much for its beauty that the sea makes a claim upon men's hearts, as for that subtle something, that quality of air, that emanation from the waves, that so wonderfully renews a weary spirit."
Last edited by svHyLyte; 12-29-2012 at 02:13 PM.
Reason: Correct typo