Join Date: Feb 2010
Location: Narragansett Bay
Thanked 306 Times in 286 Posts
Rep Power: 8
Re: Toe rail cap
The brass stuff you've seen on older (
) boats is usually just flat-bar cut to length with the sharp edges filed off and a screw each end to hold it on......
Thanks for the pic. Unfortunately, the toe rail is convex, so the tread needs to be curved along its length.
I also have chafe protection, but they are only about a half inch wide and a foot long and sit atop the toe rail's highest point. I've thought about putting a few of them parallel to each other, where the foot tread needs to be, but think it may look bad.
The idea of a tread came to me because a friends has a Taswell will a gorgeous brass thread at the lifegate, but its OEM.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
In the harsh marine environment, something is always in need of repair. Margaritas fix everything.