SailNet Community - View Single Post - wood transome plate for a rib
View Single Post
  #1  
Old 01-18-2013
jasonr575 jasonr575 is offline
Senior Member
 
Join Date: Sep 2006
Location: connecticut
Posts: 183
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 8
jasonr575 is on a distinguished road
wood transome plate for a rib

I have a rib from defender. It has a fiberglass transome that is part of the hull. I would like to mount some pvc pipe for rod holders and to support a diver down flag. There are some dinghy davit eye bolts on the inside of the transome. I was going to cut a piese of wood a little smaller than the transome itself, make holes where the eye bolts are and place it in the aft of the boat against the transome and secure it in place with a few pegs through the eye bolts. Then i can screw the pvc to that. Did anybody come up with a better solution? I dont want to drill through the fiberglass for. Fear of making a mistake or having water leak in. I also think it would be a good place to put a pole with a light on top for being out at night. I am looking for other ideas.
Reply With Quote Share with Facebook