SailNet Community - View Single Post - PSC34 Gear Reduction Ratio
View Single Post
  #4  
Old 01-27-2013
YankeePSC34 YankeePSC34 is offline
Junior Member
 
Join Date: Feb 2009
Location: Liveaboard SV Yankee
Posts: 21
Thanks: 5
Thanked 2 Times in 2 Posts
Rep Power: 0
YankeePSC34 is on a distinguished road
Re: PSC34 Gear Reduction Ratio

Thanks Neal. That gives me more ease to believe that the gear box on Yankee has a reduction ratio of 2.14 too. I also checked my original Pacific Seacraft manual. In the propulsion chapter it does not list neither the Yanmar 3JH2E engine, nor the Austral 17 x 10 2-blade prop, nor the 1" shaft diameter, nor the 1"x1.375"x4" cutless bearing, nor the stuffing box, but a reduction ratio of 2.14 for the gearbox. I do believe now that it might be correct and not just a copy/paste information.
Reply With Quote Share with Facebook