I have two of these panels I plan on installing to a dodger I'm going to make and try to fit them as best I can... sew them onto the dodger...

Here are the specs:

Electrical Specifications

PVL-128 18ft x 15˝ in.x 0.16 in. 17 lb.

Electrical Specification: PVL-128

Rated Power Pmax 128 Watts

Nominal Operating Voltage 24 Volts

Operating Voltage (Volts)Vmp 33.0 Volts

Operating Current (Amps) Imp 3.88 Amps

Open-Circuit Voltage (Volts) Voc 47.6 Volts

Short-Circuit Current (Amps) Isc 4.8 Amps

Series Fuse Rating (Amps) 8 Amps

Min. Blocking Diode 8 Amps

That's 256 watts total for both panels... not bad.... they are a little long and have to figure how to attach to the dodger but I'm sure I'll work it out...

These can be bought on Fleabay and they cost about $1 a watt or slightly higher... what is good about them is the flexibility and long wear since it must meet the current building codes... they are really tough and I have walked on them and so has my science kids when I used them for demonstration... very sturdy!

Nick