Originally Posted by Capt-T
Those of you with the Garhauer motor lift... is this easy to store when not in use? I'm assuming there must me some type of mounting hardware on the transom with a collapsable davit arm that stores when not in use. Is this correct? If so, does the arm completely remove from the mounting hardware? or just fold up in place? or something else... pics earn you bonus points!!
I dont have a picture as its rarely set up. I have the Garhauer radar pole with detachable engine hoist. On the pole are two permanent ring clamps about 2 feet apart with slots on the side of the clamps for a verticle pin,
The detachable hoists 2 arms with the verticle pins at the ends of them, unfold like accordian till reaching the 2 feet length and slide down into the slots and are locked in by a pin ring, The arms are then attached to the bar with a 6:1 purchase with a carniner on the end
Open link and click on the bottom radar pole picture to enlarge, Detachable hoist stores in a small bag about the size of a 3 foot piece of 2X4
Garhauer Marine Hardware -5537120