Battery alarm troubleshooting
Any advice on why my Beta Marine BD722 Battery/Engine Alarm is remaining on after I start the engine?
Came up to the boat over the weekend and did a routine engine start. Apply heat for 10sec, key turned, buzzer comes on with low oil light alarm + battery + temperature all on, start engine and alarms remains on with the batter light on (oil and temp off)!
All wiring seems to be in place! But I noticed that if I use the battery selector switch (1 or 2 or both or off) the alarm goes off when the switch is in the off position but remains on in the 1 or 2 or both modes.
Thanks in advance!
I seem to be on a roll as this last few months has been one thing going wrong
after an other!
Last edited by jaybeegee; 02-17-2013 at 11:45 AM.