SailNet Community - View Single Post - BOLT head in the Bilge...
View Single Post
Old 02-17-2013
guitarguy56's Avatar
guitarguy56 guitarguy56 is offline
Senior Member
Join Date: Oct 2012
Posts: 629
Thanks: 8
Thanked 21 Times in 20 Posts
Rep Power: 3
guitarguy56 is on a distinguished road
Re: BOLT head in the Bilge...

I would recommend removing the broken bolt and replacing both bolts as the remaining bolt with the head may have been compromised and may also lose it's 'head' (pun intended)... I would not trust the loads imparted on one bolt all that time (may be ready to shear off too)... good thing you spotted it sooner than later...
Reply With Quote Share with Facebook