SailNet Community - View Single Post - BOLT head in the Bilge...
View Single Post
  #9  
Old 02-18-2013
SailMonkey SailMonkey is offline
Future liveaboard
 
Join Date: Feb 2006
Location: Wisconsin/Lake Michigan
Posts: 63
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 9
SailMonkey is on a distinguished road
Re: BOLT head in the Bilge...

I should add that we did an engine alignment when installing a new prop shaft and coupling back in October. From my notes, the opposite corner was raised 5mm. That was probably 125 engine hrs ago. I'm thinking that may have something to do with the stresses that caused this eventual failure.
Reply With Quote Share with Facebook