SailNet Community - View Single Post - BOLT head in the Bilge...
View Single Post
post #18 of Old 02-20-2013
Junior Member
Join Date: Dec 2012
Posts: 22
Thanks: 0
Thanked 1 Time in 1 Post
Rep Power: 0
Re: BOLT head in the Bilge...

depending on how much of the bolt shoulder is sticking out, you can use a chisel and hammer to make it turn. you want to walk it around you do not want to use it as if you were using a screw driver to turn it. basically the chisel would be flat against the block so when you hit it with the hammer it turns the screw.
captainbri is offline  
Quote Share with Facebook
For the best viewing experience please update your browser to Google Chrome