SailNet Community - View Single Post - Deck restoration
View Single Post
  #1  
Old 02-21-2013
lobosolo98 lobosolo98 is offline
Junior Member
 
Join Date: Apr 2012
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
lobosolo98 is on a distinguished road
Deck restoration

I have a Morgan Out Island 41. There are a ton of old hardware on the deck that I want to remove. Snaps for a nonexistent dodger, unused fairleads, deck mount for long gone spinnaker boom, etc. Some holes are in a cored deck, others are in a hollow. It is my plan to spend a weekend pulling screws and filling with epoxy. I watched a fiberglass guy repair bunch of screw holes in my pedestal last year. He used a counter sink to flare the holes. I never understood why. So I have 2 questions:
1. Should I counter sink the holes as well? Or sand it smooth and fill the hole?
2. Do I use talc or some other filler to thicken up the epoxy?
Reply With Quote Share with Facebook