SailNet Community - View Single Post - Hull indent on P30, where uppers meet the hull
View Single Post
  #3  
Old 02-27-2013
hamburking hamburking is offline
Member
 
Join Date: Mar 2010
Location: Kingston
Posts: 36
Thanks: 0
Thanked 1 Time in 1 Post
Rep Power: 0
hamburking is on a distinguished road
Re: Hull indent on P30, where uppers meet the hull

I'll take some pix and post asap.
But basically, where the upper shroud is bonded to the hull, about 6 inches below the rub rail, the hull goes in a bit, rather than the smooth curve you would expect. Looks like a dimple or dent with an 8" diameter.
Reply With Quote Share with Facebook