Re: Raymarine transducer sense wire (-RAYA 7pin connector)
Happy to help.
Originally Posted by Alex W
The e7d seems to want to see something on sense to know that a transducer is connected. I will do more tests and report back.
That's entirely possible.. It should be sufficient to connect Pins 5 & 6 together in the back of the connector and leave it at that.
EDIT: FWIW, if your transducer is a 300kHz unit and the E7 is transmitting at 200kHz, although it might work happily, don't expect the depth reading to be all that accurate..
From RFC 1925: "(3) With sufficient thrust, pigs fly just fine. However, this is not necessarily a good idea. It is hard to be sure where they are going to land, and it could be dangerous sitting under them as they fly overhead."
Last edited by Classic30; 03-07-2013 at 01:21 AM.