SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Atomic 4 (http://www.sailnet.com/forums/atomic-4/)
-   -   My simple oil change pump (http://www.sailnet.com/forums/atomic-4/80233-my-simple-oil-change-pump.html)

tommays 10-29-2011 02:06 PM

My simple oil change pump
 
http://i565.photobucket.com/albums/s...1_10290017.jpg

Mr Goodpump Jr which has amazing suction

http://i565.photobucket.com/albums/s...1_10290022.jpg

My custom cover hole which allows about 95% of the oil to be sucked out

BubbleheadMd 10-29-2011 02:09 PM

Awesome!

Southcoasting 12-13-2011 10:27 AM

Quote:

Originally Posted by tommays (Post 791577)
http://i565.photobucket.com/albums/s...1_10290017.jpg

Mr Goodpump Jr which has amazing suction

http://i565.photobucket.com/albums/s...1_10290022.jpg

My custom cover hole which allows about 95% of the oil to be sucked out

I'm guessing you "tap n dyed" this custom hole so that you can close it back up with a screw? If not, can you explain a bit more?

MarkSF 12-13-2011 05:07 PM

Quote:

Originally Posted by Southcoasting (Post 806049)
I'm guessing you "tap n dyed" this custom hole so that you can close it back up with a screw? If not, can you explain a bit more?

I can see the dipstick in shot. Why not go through the dipstick hole?

tommays 12-14-2011 02:53 PM

The dip stick does NOT go to the bottom of the pan like a modern motor and sucking out oil through a 1/4 OD of 1/8 ID tube is really slow

The motor is mounted at a REALLY steep angle and when i had it out and in the shop that is were the oil pools

All the built in holes will not get much oil out as there placed for a more level install


All times are GMT -4. The time now is 08:43 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012