SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Boat Review and Purchase Forum (http://www.sailnet.com/forums/boat-review-purchase-forum/)
-   -   Catalina Owners (http://www.sailnet.com/forums/boat-review-purchase-forum/7885-catalina-owners.html)

DPS 08-28-2003 08:26 AM

Catalina Owners
 
I am currently researching Catalina 30s in the 1984 - 1988 range. I currently sail in the Great Lakes region. Cost is one of my main issues. I would expect in some cases a boat of this vintage would have had various upgrades along the way, but not necessarily. I intend to have a purchase survey done before I close on any deal.

My questions are with regard to the Catalina 30 known or expected problems for a boat of this age. What systems and structural elements, are most likely to become major projects on this boat and at what cost? I realize a survey may uncover some of this information, but I value anyone''s insight from past experience. IF fixes run into the thousands, I may be better off looking at a later model.

I have owned an Oday 23 for many years and with the exception of center board projects a rigging refit, and seasonal maintenance this boat has been solid as a rock. I realize a Catalina 30 has much more complex systems than my Oday, so your opinions are welcome.

Dennis

sailingfool 08-28-2003 10:51 AM

Catalina Owners
 
Dennis,

You need to take this subject to the Catalina 30 email group where I''m sure the Catalina owners can tell you everything you might want to know. You should also search/read the related archives to see what issues the owners have discussed in the past.

good luck.

tsenator 09-11-2003 09:27 PM

Catalina Owners
 
Definetly ask the question on the Catalina 30 Sailnet email list. There are a lot of C30''s over the years with potential issues.....but it really depends. I can say that I have never heard of any real serious issues.

Also take a look here http://www.catalina30.com/

sailnaway 10-24-2003 07:51 PM

Catalina Owners
 
The keel bolts can be a problem they may look ok but look very close at them. Also for some reason they built some with the rudder shaft welded to a steel plate not stainless like the shaft. sea water gets in the top where the shaft comes out of the rudder and gets down to the steel and it rusts away from the shaft and rudder failure is not far behind. The only fix is to cut it open save the shaft and build a new rudder with all stainless parts.

DPS 10-27-2003 06:23 AM

Catalina Owners
 
Thanks all --for the suggestions


All times are GMT -4. The time now is 11:51 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012