Originally Posted by Sailormon6
I'd sure like to see some C&C owners check in with this forum. I bought a 35' Landfall last year, love the boat, and would like to be able to chat with other owners about occasional mechanical and other concerns. She's presently on the hard at a Chesapeake Bay marina, not too far from the Solomon's, and, as soon as the nightime temps get consistently above freezing, I'll be headed that way to give her a couple coats of antifouling and launch her for the season.
I have a C&C 30 1972 vintage hull # 40
The gas fuel tank is rectangular and of unknown age and or material and has the printed words RAC??? in a 6" high diamond <> shape on it. Who made it and are they still in business?
I dont know the material, age or condition of the tank. Do you have any information on this tank and if it was an origional installation or later replacement?
My previous 1979 C&C 30 hull # 350 and a 1974 model I looked at and both had cylindrical stainless or monel tanks.
What cost and replacement types are available for my tank if needed ?
A similar vintage Viking 33 (C&C) had a tank leak while people were partying aboard and only a visitor noticed the gas smell and discovered the bilge full of gas. (People were smoking at the time) Close call.
Also my boat It is different as the shaft is directly on center line and the rudder post tube only has one brace to the rear. Newer models have three braces to the hull.
I am replacing the tiller with a wheel and wonder should I rebrace the tube?? Do you sell any drive wheels, pulleys or parts to fit the Edson system?
Do you carry any rudder post top fittings for this change ??
Do you sell the molded rudder halves for the C&C 30 rudder repairs, or just the full rudder and shaft and at what cost?