Cabo Rico 38 traveler design
We have a 1978 Cabo Rico 38 and are looking to add a traveler. We also plan to add a dodger. The way the cabin top is designed doesn't provide many options for these to exist together. It would either need to go too far forward or back in the cockpit. I don't want it in the cockpit if I can help it. I was wondering if anyone has some suggestions based on their experience. Any information you could provide would be great!
Location of traveller on CR38
We have a 1987 CR38 so I don't know if our traveler information will help you. Ours is mounted just forward (about 2 inches) of the forward cockpit combing with enough clearance for the dodger. You have to reach to the side of the dodger to adjust it but it isn't that bad. You can also adjust it by sanding in the companionway and adjusting the lines through the open dodger window. Hope this helps.
YOu may want to try the Cabo Rico google group:
caborico | Google Groups
We're more active there.
|All times are GMT -4. The time now is 05:07 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012