rub rail

[ncsc]

Has anyone had any experience replacing the rub rail on a cal 34, or any cal, with something other than the factory rubber one? How expensive would it be to just finish the hull and deck joint?

[Irishrover7]

Hi,
I am in need of the same thing on my Cal 34.
Did you have any luck yet?

[Irishrover7]

I have another question, where do you get the new stock rub rail material?

[cavah]

Seal's Spars & Rigging, Google it, they have rub rail for most cal's.....
Good Luck !

[sritz]

I have replaced the rub rail on my Cal 30. Try to do it on a warm day -- the rubber is much more flexible. I got it from D&R Marine. It took about 3 hours.

[USCGRET1990]

Originally Posted by ncsc

How expensive would it be to just finish the hull and deck joint?

A rub rail is there to take the beating instead of your hull and/or deck.
Be best to keep one. I have seen long strips of oak used to be more pleasing to the eye yet durable.

[saltybob2]

I just ordered a new rub rail for my 1978 Cal 34 from Seals Spars and Rigging.
Was $415, incl shipping from California to Oregon. He knows the topic.

[cal30]

Howzit Cal sailors,
Just finished installing new rub rail on Cal27. Now just need to pull the tape on the waterline and add bootstripe,and we'll be done . Steve at Seals and Spars knows his business and helped out with the install instructions over the phone. Shipping to Hawaii was steep($90.00!), but we needed to change it out. Thanks to whoever(Salty Bob) mentioned Steve and his business. I second the recommendation. Good sailing.
Aloha ka'kou,
Leonard