Cal 34 engine controls

pmt200 · #1 (**permalink**) 10-03-2010

Hi all,
I have an old Cal 34 with tiller steering and am trying to re-assemble the two lever Morse engine controls which were removed by a previous owner. I think there is a part or parts missing for hooking up the shifter cable to the shifter lever. Does anyone out there have a diagram or photos of the assembly that they could share?
I am also trying to source a new or used fitting for the top of the rudder post that the tiller attaches to.
Any help would be greatly appreciated.

Cheers,
Peter

dieselboy · #2 (**permalink**) 10-04-2010

i have a Cal 29' and have the original controls in mine less a broken cable as of this weekend. i can shoot what you like?

xsboats · #3 (**permalink**) 10-04-2010

Rigrite sells the rudderhead fitting you are looking for.

pmt200 · #4 (**permalink**) 10-05-2010

Wow!
Thanks to all for the speedy replies.
Dieselboy....Thanks for the offer of photos, but I believe it or not, today I managed to pick up the missing parts for the controls from a great marine consignment store up here in Bellingham Wa.
xsboats.... Thanks for the heads up on Rigrite. I will contact them right away regarding the rudder post fitting.

Thanks again,

Peter