SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Diesel (http://www.sailnet.com/forums/diesel/)
-   -   oil pressure sender Yanmar 2GM (http://www.sailnet.com/forums/diesel/97546-oil-pressure-sender-yanmar-2gm.html)

boz86 03-13-2013 10:58 AM

oil pressure sender Yanmar 2GM
 
I went to troubleshoot my oil pressure sender last night (no warning tone/light before start), and had trouble getting the cover off the front where the wire enters the sender.

I didn't want to yank too hard and risk breaking something that would leave me rewiring around the engine wiring harness.

Anyone know which direction that cover comes off? Pull straight out, twist, something else?

Thanks

boz86 03-17-2013 10:30 AM

Re: oil pressure sender Yanmar 2GM
 
Found the answer so I figured I'd post in case anyone needs to know and searches.

There's a boot that should slid back uncovering a phillips head screw on the sender. My wire's boot had pretty much welded itself to the wire and didn't pull off without breaking the wire ring.

Turns out that part had failed, which is why my alarm wasn't working. So no loss breaking the wire ring/connector.

Thanks to Scott at AR Marine of Annapolis for giving me the answer.

arf145 03-18-2013 03:34 PM

Re: oil pressure sender Yanmar 2GM
 
Thanks for following up and adding to the knowledgebase, boz!


All times are GMT -4. The time now is 10:52 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012