M25 Upgrades as Completed on 1985 Ericson 32-3
Here are two blog entries outlining one upgrade project:
M25 Engine Wiring Upgrade Part 1--Cockpit Gauges - Blogs - EY.o Information Exchange
M25 Engine Wiring Upgrade Part 2--Alternator Jump and Bus Bar - Blogs - EY.o Information Exchange
Re: M25 Upgrades as Completed on 1985 Ericson 32-3
Again, a very well written and enjoyable piece.
One nit, however; when you remove the trailer connector closest to the engine, rather than replacing with butt splices, it is a good idea to use a terminal strip, and ring connectors.
Not only does it cost more (and thereby help the marine supplier economy), but it allows you to remove one connector to troubleshoot, or all the connectors in the event that you have to remove the engine.
|All times are GMT -4. The time now is 05:39 AM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012