Shop near Annapolis to service my Balmar alternator?
It could take up to 3 weeks to have it service at the factory.
Not sure whats wrong but will do more troublesooting this PM but it looks like something inside is not working as the regulator past the troubleshooting tests. Brand new Dayco Top Cog belt as recommended by Balmar. thanks\
There are several places which could check out your alternator. Among them:
Peter Kennedy, PKYS, Eastport (Annapolis)
Aric Euler, Rockhold Creek Marina, Deale (next to Shipwright Marina and Herrington Harbour North)
Scott Berg, Chardonnay Boatworks, Wash. DC (works Annapolis, too)
Before you call in the cavalry, check your connections carefully...especially the 12V sense wire and the field wire. Check these at the regulator and at the alternator to be sure they're clean and tight.
You could also put a multimeter on the output lug of the alternator while the engine is running to see what voltage you get. Should be about 14VDC.
Which regulator do you have?
Pretty sure we used Â* Auto Air Conditioning And Heating Service And Repair - Annapolis, MD - Mamock's Motor Electric
to have my friends alternator rebuilt several years ago.
|All times are GMT -4. The time now is 12:26 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012