Message No Pilot on Raymarine s3 and head 6002
My S1 cc was again dead with a sea talk fail message and .4V on the yellow wire. S1 and 6002 alone. I know Raymarine will not even look at it.
I found a used S3 on ebay. Now I get a No pilot message. S3 and 6002 alone.
But the voltage is between 7.5 and 10.8 on the yellow wire.
Would someone know about this message.
Checked all connections. Powered of and on.
|All times are GMT -4. The time now is 06:31 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012