SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Electronics (http://www.sailnet.com/forums/electronics/)
-   -   Message No Pilot on Raymarine s3 and head 6002 (http://www.sailnet.com/forums/electronics/133705-message-no-pilot-raymarine-s3-head-6002-a.html)

bonvent 04-11-2014 06:21 PM

Message No Pilot on Raymarine s3 and head 6002
 
Hi,
My S1 cc was again dead with a sea talk fail message and .4V on the yellow wire. S1 and 6002 alone. I know Raymarine will not even look at it.
I found a used S3 on ebay. Now I get a No pilot message. S3 and 6002 alone.
But the voltage is between 7.5 and 10.8 on the yellow wire.
Would someone know about this message.
Checked all connections. Powered of and on.
Thanks
Michel

CaptainDan99 04-30-2014 05:21 PM

Re: Message No Pilot on Raymarine s3 and head 6002
 
The "no Pilot" is telling you than the S3 and control head are not talking. You should see about 10.5V at the ST terminal on the CC and it should vary by about 0.5 V.

bonvent 05-05-2014 06:57 PM

Re: Message No Pilot on Raymarine s3 and head 6002
 
Thank you Dan. Very helpfull.


All times are GMT -4. The time now is 05:03 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012