Raytheon R20X interface to Raymaorine C80
I have installed on my boat radar Raytheon R20X and intend to install Raymarine C80. Can I connect radar signal from R20X to Seatalk and C80 display?
Re: Raytheon R20X interface to Raymaorine C80
I believe this radar is the same as on my boat - CRT display??
If so, from what I can remember, you can only feed a Loran signal into it to show on the display. I say Loran, but I have mine fed with an older NMEA version from my AP-Philips Mk6 GPS. The NMEA from the Navman plotter would not display.
From memory (my boat is 30 miles away), I don't think there is any output from this radar.
(I could always be wrong!! :o)
|All times are GMT -4. The time now is 04:47 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012