SailNet Community

SailNet Community (
-   Endeavour (
-   -   Traveller controls for Endeavours (

xort 03-15-2010 06:03 PM

Traveller controls for Endeavours
I have an E-42 with traveller track on the aft of the cockpit coaming (CC).

Looking to add traveller control lines instead of pins. is there anybody making gear that will fit that track? i don't know the maker of the track. Really don't want to replace the track either.


xort 03-22-2010 12:46 PM


anybody with E-42 traveller upgrades?

garymbsail 05-23-2010 08:06 PM

We have an '81 E 40. In '03 I did a number of upgrades prior to an extended cruise of the US east coast. To your point, I replaced the original traveler with a Garhauer 6:1 mainsheet control [can be used 6:1 or 3:1 depending on conditions]. The sheet block runs on a track with 3:1 contol lines at each end stopped by cam cleats. Be sure to size the sheet properly. I just put on a new 7/16" [11mm] Sta-Set. It seems good, but the season is early! The 9/16" I replaced was too large for my blocks. Overall, a good set-up.
Gary Beckett
Beverly, Mass

sea_hunter 01-24-2011 10:13 PM

Ours have been replaced with Harken. Seems to work well.

MarioG 05-17-2011 09:12 AM

Our E-32 come with a new still in box Harken traveler but seems to wide to fit in the original spot. Is there a replacement that would fit?

All times are GMT -4. The time now is 06:53 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
(c) LLC 2000-2012

For the best viewing experience please update your browser to Google Chrome