SailNet Community

SailNet Community (
-   Ericson (
-   -   prop problems (

sailingokanagan 06-04-2013 01:06 AM

prop problems
I own an Ericson 32 that had a two blade prop and over the winter I changed it for a 3 blade and now I only get max RPM's in Neutral and Reverse. In forward I only get just a little more than idle RPM's any idea what my problem might be? Thanks

ScottyG24 06-04-2013 07:53 AM

prop problems
it sounds like you are significantly over the pitch of the new three blade prop what the manufacturer suggests for running a three blade in your boat with your engine or are you "experimenting" ?

CapnChuck 06-04-2013 09:33 AM

Re: prop problems
As Scotty mentioned, the pitch needs some serious adjustment. Contact your local prop shop and give them the specs on the prop and the boat. They can tell you what pitch you will need and you will have to remove the prop and get it to them. Chuck

sailingokanagan 06-04-2013 09:49 AM

Re: prop problems
thank you for your replies at this point I was just experimenting, better to go back to the 2 blade I guess than to run the 3 blade. Thanks again.

Faster 06-04-2013 09:55 AM

Re: prop problems
There should be no problem running a 3 blade prop.. it will run much smoother and will have more thrust than the two blade (although more drag under sail) It just needs to be properly pitched. Did you pick the prop up in a bargain bin or have it spec'd for your boat and engine?

There are several prop sizing tools on line, a little time there will give you some basic starting data.

I recommend the Campbell sailor prop as a good compromise between pricey folder/feathering props and the michigan wheels.

These guys are here in BC: West by North Enterprises

All times are GMT -4. The time now is 12:03 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) LLC 2000-2012