SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Gear and Maintenance Articles (http://www.sailnet.com/forums/gear-maintenance-articles/)
-   -   The Spring Launch (http://www.sailnet.com/forums/gear-maintenance-articles/19702-spring-launch.html)

Bruce Caldwell 04-30-2002 08:00 PM

The Spring Launch
 
<HTML><HTML><P><EM><STRONG><FONT size=2>This article was originally published in May, 2000 at SailNet.<BR></FONT></STRONG></EM><BR><TABLE cellSpacing=0 cellPadding=0 align=right border=0><TBODY><TR><TD width=8></TD><TD vAlign=top align=left width=250><IMG height=317 src="http://www.sailnet.com/images/content/authors/caldwell/050102_BC_lead.jpg" width=250><BR><DIV class=captionheader align=left><FONT color=#000000><B>One of the great pleasures after a long, non-sailing winter is that first trip out of the boatyard. Here the author enjoys the fruits of his labor.</B></FONT></DIV></TD></TR><TR><TD colSpan=2 height=8></TD></TR></TBODY></TABLE>Over the past month, I had come to believe that the best part of all the work involved in readying my catboat <I>Kirsten</I> for the coming season was watching pale, bare wood darken to a reddish gold and gleam with a lustrous finish as my brush layered on the varnish. But I&nbsp;was wrong. After the long, cold winter and hours and hours of sanding and varnishing, the best part was pulling on the new throat and peak halyards I'd reeved and watching the sail I'd painstakingly lashed onto the spars rise high above me into the evening twilight. Still, the sound of the one-cylinder diesel engine chugging to life and putt-putting steadily was a close second. And the ratcheting clicks as I pulled the mainsheet through its Harken gear were in hot contention as well.&nbsp; <!--<p> must precede this sidebar table COLOR,ARTICLE ID, HEAD CHANGES --><P>The gleam of fresh varnish is only part of&nbsp;spring commissioning. But with the sounds of the engine and the Harken gear and the vision of the billowing sail, I effectively crossed over into summer. </P><P><TABLE align=right border=0><TBODY><TR><TD width=8></TD><TD></TABLE></TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE></P><P>This was my first spring commissioning. When we acquired <I>Kirsten</I> the summer before,&nbsp;she was in excellent condition, needing only the replacement of a few corroded hoses on her engine. Aside from washing her down after sailing and restoring the varnish on her hatch cover after months in the sun had faded it, she was a maintenance-free sailing vessel. (OK, nearly maintenance-free.) <P>Last season came to a reluctant end in mid-December, when the water to the docks was shut off. <I>Kirsten</I> was hauled out, her mast, gaff, and boom were tied down on cradles, her sail was sent out for cleaning and repairs, the engine was winterized, and the tarp was secured over her from stem to stern. The long months without sailing loomed ahead. <P>At first, my ideas for launching her again in the spring were fairly simple. Do a few maintenance chores on the engine, step her mast, and go sailing. But over the winter, my to-do list grew and grew, and grew even more as the work got underway. When the past month of work culminated with bending on the sails, there were still a few chores to do, as well as a list of things to do differently next time (see sidebar). <P><TABLE cellSpacing=0 cellPadding=0 align=center border=0><TBODY><TR><TD vAlign=top align=middle width=444><IMG height=301 src="http://www.sailnet.com/images/content/authors/caldwell/050102_BC_tools.jpg" width=444><BR><DIV class=captionheader align=left><FONT color=#000000><B>A few of the implements the author has grown to know well during the off season and his recent spring commissioning.</B></FONT></DIV></TD></TR></TBODY></TABLE><BR>The cost of spring commissioning is one thing I don't savor. I am sure that I did more than my share of flinching, wincing, and cringing at the cash register. On one of my trips to the marine supply store for some expensive teak cleaning and finishing materials, some more sandpaper, tacking cloth, disposable gloves, and other odds and ends, I noticed the young sales clerk was grinning. "What?" I asked. "When I ring up the total," she explained, "it's fun to watch your expression." <P>But the labor of getting a boat ready is entirely something else. The hours involved were filled with pleasure for me. Working outdoors in bright sunlight and salty breezes leaves me satisfyingly tired, and going to the marina is always a treat. <EM>Kirsten</EM> is kept in a small neck of a bay that's surrounded by salt marshes, where the marina is filled with life. Swans, egrets, cormorants, and ducks glide, stalk, dive, and paddle by. A rooster crows from the shore throughout the early morning hours, and barn swallows swoop by as the evening twilight descends. The marina's dog greets me and begs for a ball to be thrown. A large fish splashes tantalizingly between the empty floating docks while muskrats swim back and forth from shore to shore and roil the surface as they come and go from their nest inside the floating dock. <P>Over the winter, my visits to the marina didn't stop once <I>Kirsten</I> was hauled out. The tarp covering her was old and deteriorating. It needed patching when it chafed against parts of the boat and mast cradle, shaking when snow and ice covered it, and re-fastening when winds kicked up above 30 knots. <P><TABLE cellSpacing=0 cellPadding=10 width=160 align=right border=0><TBODY><TR><TD><IMG height=2 alt="" src="http://www.sailnet.com/images/content/authors/bullets/black_1pix.gif" width=160 border=0></TD></TR><TR><TD vAlign=top align=middle width=160><FONT face="Arial, Helvetica, sans serif" color=black size=+1><B><I>"As spring approached, the ice melted, and the tides rushed in and out, deeper and faster than in the summer."</I></B></FONT></TD></TR><TR><TD><IMG height=2 alt="" src="http://www.sailnet.com/images/content/authors/bullets/black_1pix.gif" width=160 border=0></TD></TR></TBODY></TABLE>I was glad for the chances to get out there. There were rare sights, as in January, when the entire bay froze over with eight inches of ice. As the ice rose and fell with the tide, pilings caught in its grip were jacked out and toppled over. As spring approached, the ice melted, and the tides rushed in and out, deeper and faster than in the summer. Soon, the marina's forklift and trailer got busy, and other boat owners began appearing. <P>Finally, in mid-March, a forecast of several dry, sunny days with temperatures in the 50s promised good varnishing weather. I walked into the marine supply store for the first time in months, and left with cans of varnish and thinner, sheaves of sandpaper, paper buckets, disposable gloves, brushes, and rags. The tarp came off, the spars were lowered to the ground and propped up, and the scraping and sanding began. <P>Over the next several weeks, my to-do lists took me to the marina more than a dozen times. I divided my list into three parts, based upon things that must be done before the mast gets stepped, before the boat gets launched, and before any sailing takes place. A fourth list also evolved, but I'd leave that for later. Metal polishing fell largely into that category. <P><TABLE cellSpacing=0 cellPadding=0 align=right border=0><TBODY><TR><TD width=8></TD><TD vAlign=top align=left width=220><IMG height=317 src="http://www.sailnet.com/images/content/authors/caldwell/050102_BC_mast.jpg" width=220><BR><DIV class=captionheader align=left><FONT color=#000000><B>In stepping <EM>Kirsten</EM>'s mast, the author was halfway to his goal of having a functional, floating vessel.</B></FONT></DIV></TD></TR><TR><TD colSpan=2 height=8></TD></TR></TBODY></TABLE>Most of the hours were for sanding and varnishing the spars. This is work that, by its nature, breaks down into two-hour stints separated by at least a full day. The most challenging aspects of this work were caring for the parts of the spars that had to rest on something while they were being varnished and judging the windows of opportunity presented by the weather. If it was too cold and wet, the varnish would turn cloudy and need to be scraped, sanded, and reapplied. If it was too windy, the spars quickly collected dozens of unfortunate flying insects. I vowed to do this in the garage the following year. <P>The most unpleasant aspect of readying the boat for its splashdown was all the toxic chemicals involved. In addition to varnish and thinner, there were fumes from acetone, expoxy, metal polish, engine lubricant, diesel fuel, fuel additive, and teak cleaner and finish. The back of my van would have qualified as a superfund site, and there were mornings when, despite the use of disposable gloves, my hands were swollen, red, and stiff.&nbsp;Judging that I had reached my own tolerance limits for toxic materials, I asked the marina to sand and paint the boat's bottom. <P>Toxic materials shouldn't be part of sailing. While the worst anti-fouling paints have been banned and paint manufacturers are ongoingly developing safer and cleaner materials, there still seems to be much progress to be made with respect to all the materials used to maintain boats. <P>And I have yet to make much progress in knowing how to do the work involved in maintaining <I>Kirsten</I>. Despite my repeated efforts to do the best job possible, after seven coats of varnish the mast was raised and the spars were attached with drip lines of varnish and cloudy patches here and there. Plus, the few simple engine maintenance chores I had done had created problems that the marina had to fix. I hadn't refastened the filters tightly enough, and air got into the fuel and water-cooling systems. <P><TABLE cellSpacing=0 cellPadding=10 width=160 align=right border=0><TBODY><TR><TD><IMG height=2 alt="" src="http://www.sailnet.com/images/content/authors/bullets/black_1pix.gif" width=160 border=0></TD></TR><TR><TD vAlign=top align=middle width=160><FONT face="Arial, Helvetica, sans serif" color=black size=+1><B><I>"Timing and communications are important...the boatyard painted the bottom and launched the boat before I'd washed and waxed the topsides."</I></B></FONT></TD></TR><TR><TD><IMG height=2 alt="" src="http://www.sailnet.com/images/content/authors/bullets/black_1pix.gif" width=160 border=0></TD></TR></TBODY></TABLE>Timing and communications are important in commissioning. Through a mix-up on my part, the marina painted the bottom and launched the boat before I had washed and waxed the topsides. The wash and wax should be done before the bottom painting and before any varnishing, since the wax can drip down onto the bottom paint and create ugly smears and it can also protect the gelcoat from the varnish and thinner. Then, for weeks I had to nag the sail cleaning and repair service to get my sail and sail coverówhich had been picked up in Decemberóback to me by mid-April. <P>When the sail came back, I found myself sitting glumly inside my van in the marina lot as rain poured down, the mast still on its supports on land. It looked like that weekend, too, would pass without completing the commissioning. But the marina manager came over and told me that as soon as the forklift was available, they would help me step the mast. Shortly afterward, despite the continuing rain, all hands were busy moving <I>Kirsten</I> from her slip to the launch area, where the mast was suspended from the forklift. Another boat owner saw what was happening and helped push and pull <I>Kirsten</I>, whose engine was not yet running, past the line of finger piers, bowsprits, and outboard propellers. <P>After the mast was stepped and <I>Kirsten</I> was back at her slip, the marina manager made the final adjustments to the engine. The rain died away, and the sun came out as I tugged the sail out of its bag. I began lacing it on. I pushed the quarter-inch line through the grommets, brought the line around the gaff and then over and under itself before leading it to the next grommet, and went back over it to tighten it up along its length. <P><TABLE cellSpacing=0 cellPadding=0 align=right border=0><TBODY><TR><TD width=8></TD><TD vAlign=top align=left width=354><IMG height=242 src="http://www.sailnet.com/images/content/authors/caldwell/050102_BC_kirsten.jpg" width=354><BR><DIV class=captionheader align=left><FONT color=#000000><B>With the spring commissioning now over, <EM>Kirsten</EM> stands ready to depart the dock at any time. What more could an owner want?</B></FONT></DIV></TD></TR><TR><TD colSpan=2 height=8></TD></TR></TBODY></TABLE>As I worked alone on the boat, the sun beat down and the temperature rose to 70 humid degrees. A young cormorant dove, surfaced, looked around, and submerged again. The muskrats swam to their nearby nest. The evening breeze began, flocks of swallows began darting about, and the sail, now attached to the partly raised gaff, provided shade from the setting sun as I laced the foot of the sail to the boom. I then grabbed the new halyards, hauled, and the sail rose up, towering above me in the twilight. <P>I looked out to the darkening bay, and considered. The breeze had died, leaving a mirror smooth surface. I was dead tired. I lowered the sail and fastened its cover on. Later that night, back home, it hit me. <I>Kirsten</I> was finally ready. The sailing season was here. <!--sidebar table settings follows</p></td></tr> COLOR, HEAD CHANGES--><P><TABLE cellPadding=5 width=468 bgColor=#d2e0c7 border=1><TBODY><TR><TD><A name=sidebar><P align=left><FONT face="Trebuchet MS, arial" color=#6da544 size=+2><B>Sore Muscles, Empty Checkbook, Full Heart</B></FONT></P></A><!--<p> follows above for first line of sidebar article--><P>My spring commissioning with Kirsten began in mid-March and ended in mid-April. I went through my ordinary list, which includes checking the rigging, cleaning and repairing the sails, electrical and engine maintenance, bottom painting, minor repairs to gelcoat, and cleaning and waxing the topsides. I also did a few things I only expect to do once, like pulling the CB radio antenna cable out of mast and replacing it with a VHF cable.<BR><BR>At the suggestion of some dockside critics, I added varnishing the teak (hatch boards, coaming, etc.) to my list for the first time. Previously, the wood&nbsp;had been left natural, which created deep furrows between the grain in some places.&nbsp;<BR><BR>The following is a look at how I broke down my work list to prepare <EM>Kirsten</EM> for a season of recreational sailing, including costs and materials used. <P><B><I>Kirsten</I>'s Relevant Specifications</B> <TABLE border=0><TBODY><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Length Overall: 20 feet, plus 3-foot bowsprit</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Beam: 8 feet</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Draft: centerboard up, 2 feet, 2 inches; centerboard down, 4 feet, 2 inches</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Spars : Spruce mast (23 feet, 6 inches), gaff (14 feet, 10 inches), and boom (20 feet); boom crutch, mast hoops, and parrel beads</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Metal: Bronze anchor roller, cleats, rode leads, running lights, forestay turnbuckle; brass portholes, ship's bell; stainless steel gooseneck fittings, traveler </TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Engine: Yanmar 1GM inboard diesel</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Electric: Two 12-volt batteries for engine, lights, bilge pump, and radio</TD></TR></TBODY></TABLE><P><B>To do before stepping the mast:</B> <TABLE width=460 border=0><TBODY><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD align=left>Inspect anchor and running lights on mast</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Make sure blocks run freely</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Varnish mast, gaff, boom, mast hoops, blocks</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Inspect/replace halyards, forestay, chafing gear</TD></TR></TBODY></TABLE><P><B>To do before launch:</B> <TABLE width=460 border=0><TBODY><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Remove tape from through-hulls</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Make gelcoat repairs</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Clean and wax topsides</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Replace zinc anode on propeller shaft</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Inspect centerboard and centerboard pennant</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Sand and paint bottom</TD></TR></TBODY></TABLE><P><B>To do before sailing:</B> <TABLE width=460 border=0><TBODY><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Clean and finish teak</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Charge batteries</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Replace/clean engine oil, fuel, and water filters</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Check water pump impeller</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Inspect/repair wiring</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Inspect/replace/upgrade safety gear</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Clean and polish metal</TD></TR><TR><TD width=10></TD><TD vAlign=baseline><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Clean and refresh Porta-Potty</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Rig sail</TD></TR></TBODY></TABLE><P><B>Brightwork Materials:</B> <TABLE width=460 border=0><TBODY><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Epiphane varnish and thinner</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Sikkens teak finish </TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Two-part teak cleaner</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Sandpaper</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Scotch-Brite<SUP><FONT size=-1>TM</FONT></SUP> Ultra Fine Hand Pads</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Tack cloths </TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Paint brushes</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Paper paint buckets</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Disposable gloves</TD></TR></TBODY></TABLE><P><B>Cleaning Materials:</B> <TABLE width=460 border=0><TBODY><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Acetone </TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Boat wash and wax </TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Metal polish cloths and pastes</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Rags</TD></TR></TBODY></TABLE><P><B>Repair and Maintenance Materials:</B> <TABLE width=460 border=0><TBODY><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Epoxy</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Leather</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Sail twine</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Plastic tape</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>200 feet of 3/8-inch, three-strand rigging line</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Gelcoat repair kit</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Waterproof silicone sealant</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Engine lubricant</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Oil and diesel fuel filters</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Oil absorbent bilge pads</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Diesel fuel additive for fungus and moisture</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Zinc anodes for engine and propeller shaft</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Plastic spiral-wrap for wire straps on mast</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>12-volt deep cycle battery</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Electrical connectors</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Engine hatch cover noise insulation</TD></TR></TBODY></TABLE><P><B>TOTALS:</B> <TABLE width=460 border=0><TBODY><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Labor: 55 hours</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Materials: $600</TD></TR><TR><TD width=10></TD><TD vAlign=baseline width=12><IMG hspace=12 src="http://www.sailnet.com/images/content/authors/Bullets/cruising_bullet.gif"></TD><TD>Marina charges: $500 for mast wiring, bottom painting, stepping mast, and engine maintenance</TD></TR></TBODY></TABLE><!--back to top follows sidebar table preceded by </P> on last line of sidebar COLOR, ARTICLE ID CHANGES--></TABLE><BR><BR></P></TD></TD></TR></TBODY></TABLE></P><HR align=center width="75%"><BR><P><STRONG>Suggested Reading:</STRONG></P><P><STRONG><STRONG><A class=articlelink href="http://www.sailnet.com/forums/showthread.php?threadid=18904">The Coming Season</A></STRONG> by Bruce Caldwell</STRONG></P><P><STRONG><STRONG><A class=articlelink href="http://www.sailnet.com/forums/showthread.php?threadid=19637">Quick Rig and Deck Check</A></STRONG> by Tom Wood</STRONG></P><P><STRONG><STRONG><A class=articlelink href="http://www.sailnet.com/collections/articles/index.cfm?articleid=suelar027"http://www.sailnet.com/forums/showthread.php?threadid=19561"http://www.sailnet.com/store/selectlist.cfm?list_id=59&amp;source=5&amp;source= edt">Line and Rope Sale</A></STRONG></P></HTML></HTML>


All times are GMT -4. The time now is 03:29 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012