I recently purchased a 1987 Hunter 31''. During the survey the upper port spreader was not in the proper position on the mast. A rigger identified the spreader as being broken. I procured a special order replacement spreader. However, upon replacement the spreader was not broken but the base on the mast was. It has been repaired. Now I have an unused spreader which I would like to sell. I purchased it from Charleston Spar identified as a BF3 aluminum and aerodynamically shaped. It is 920 mm long with a 30 degree sweep. If anyone is interested please contact me.
|All times are GMT -4. The time now is 04:22 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012