Looking for a Navico Depth display

Spirit_of_America · #1 (**permalink**) 12-22-2004

I have an older Navico Corus C300D depth sounder on my boat. The LCD display does not function, though it works thru the repeater in the cockpit. Appears that the LCD display itself is not getting power as it will give an alarm at low water.

So, Wondering if anyone has an old one laying around that they are willing to part with or could recommend a company to fix it.

Second option would be to update the depth/ speed and wind instriments. This as my wind direction indicator also is kaput. What are the thoughts on the Navman and Raymarine bundled sets.

Thanks
Ben

ORIANA · #2 (**permalink**) 01-19-2005

Ben,
I have the entire set of Navico displays, wind speed, wind direction, depth and log. Also have a combo unit at the nav station. My speed and depth interface went south a few months ago so I have replaced with Simrad. I am currently replacing some of the displays and would be willing to part with some of them.
I searched all over the Internet for someone that supports them but no luck.
Hugh

Spirit_of_America · #3 (**permalink**) 01-19-2005

I''ve had no luck either finding support and I''ve looked everywhere. Contact me off list at bencbacon@yahoo.com to discuss.

I could really use a working C300D depth display, though a wind / direction display and another repeater would be cool too.

They look sort of like the newer simrad, Figure if I can get another few years out of the displays, there might be something newer / fancier available by then.

Thanks again
Ben Bacon
Spirit of America
Tayana T37 pilothouse cutter
Cape Coral FL

kiwivfkr · #4 (**permalink**) 02-09-2005

I''m looking for corus 600 display if you have one or know of anyone else that has one.
Terry,

spence32 · #5 (**permalink**) 03-07-2005

i looking for a navico corus 7oodc,mine has an intermittent fault,all my speed depth compass and analogue wind plus repeater work fine so don''t want to have to replace all.

ps,the 700 seem''s to do all my wind computations vmg ect

tgeewe · #6 (**permalink**) 02-02-2008

Do you still have the manuals for the C300D unit by any chance?

Wondering how I have to make the connections, which the NMEA out wire is, etc.

thanks,
tg