SailNet Community

SailNet Community (
-   Gear & Maintenance (
-   -   Greasing Outboard (

bobendaxi 04-03-2005 07:16 PM

Greasing Outboard
Nissan 8 hp. I can''t force grease into the the bottom pivot bearing. The top bearing is OK.

It looks like the old grease hardened up in the bearing, or possibly there''s some corrosion in there. As a consequence it takes quite a bit of force on the tiller to pivot the engine and steer the dinghy.

Is there any way to clean out the old grease?


Yodagwb 04-06-2005 02:03 AM

Greasing Outboard
Does the injection nipple need to be replaced?

bobendaxi 04-06-2005 10:35 AM

Greasing Outboard

Thanks for the reply. No, I took the grease fitting off and it checked out OK. No blockage.

Dropped it in the water trying to put it back, but that''s another story . . . .


All times are GMT -4. The time now is 12:56 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) LLC 2000-2012