Join Date: Jan 2013
Location: Montreal, QC, Canada
Thanked 14 Times in 13 Posts
Rep Power: 5
Re: Islander 36 projects in paradise!!!!!
Christian with a SS welder and 6'' of tubing you can repair the pulpit.
A flat of wood with the same stanchon holes as the boat, take everything to shore.
With a vise you make the ripped up base flat again. Bye Bye chrome coating.
The large section warmed by propane, wear gloves and clamped wooden sleeves on the best section, BEND THE OTHER ONE, in the better direction.
Even bolt the bases on the plank to bend it.
If you end up short an inch or two to weld in, your man has extra.
The welds can be ground invisible.
Never say never!