Impeller is sticking.
The flexible impeller in my Jabsco water pump is seizing up. I'm certain it's the correct impeller for the model pump, and it works when I initially put it in. After a few days, it seems it must have swollen and rubs the cover plate to the extent that it will not turn anymore. What gives?
did you lube it up?
i just got a new boat and i'm getting ready to replace the impeller. the instructions call for lubing it up with some kind of special lube - i think glycerine.
If the cover plate is scored, you need to replace the cover plate as well as the impeller. Try using a GLOBE impeller as they last longer and can be run dry for up to 15 minutes...I've had real good luck with them. Here's a link & there is a cross reference for Jabsco on the site.
|All times are GMT -4. The time now is 11:26 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012