Join Date: Mar 2006
Location: New England
Thanked 18 Times in 14 Posts
Rep Power: 16
I would definitely check out whatever paint and additive you're planning on using on a piece of plywood first, to find out whether it is going to be too rough, or not rough enough a non-skid surface before actually going ahead with it.
I don't see any real reason against using the same two-part epoxy paint for both the non-skid areas and the regular deck areas, but I would also check with the manufacturer of the paint and see what they recommend.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.