Newport 41 owners
Does anyone have an original wood or steel shipping cradle, I'm in need of the dimensions so I can build one to bring my 41 home and not use jack stands.
Thanks for any assistance.
Probably better to join the Newport email list offered through this site -- there are a fair number of happy N41 owners there.
We sailed ours home, so don't have anthing that would help your quest.
Where is your starting and ending destination? Could you back-haul through one of the trunking companies that serves Catalina or one of the other mfgs?
Newport 41 Cradle
Thanks for the reply, I'm a bit new to this program and wasn't certain I'd done it right. The boat is now in Blaine Wa. on the canadian border above Seatlle.
We are rebuilding the interior so am bringing her home to Eureka, Montana and then launch her in The Flathead Lake next Spring (Lake is bigger than Tahoe) since we rarely have time to get to the coast anymore/ Will also build a self-Launching trailer for her (I designed both the Calkins and EZ Loader keelboat trailers back in the 80's but this will be a bit more challenging.)
We've had her since new in 82, and used to be the inland west dealer for Capitol yachts, sailed her to Hawaii, canada, most of the west coast and Mexico, she is a little war weary but structurally sound.
Sorry to ramble, again thanks for the reply.
Brave man, building a trailer for a 41' boat is going to be a good challenge.
|All times are GMT -4. The time now is 05:34 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012