SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Gear & Maintenance (http://www.sailnet.com/forums/gear-maintenance/)
-   -   Glacier Bay Refrigeration Systems (http://www.sailnet.com/forums/gear-maintenance/29053-glacier-bay-refrigeration-systems.html)

voyagersail 02-12-2007 03:02 PM

Glacier Bay Refrigeration Systems
 
Iíve read several articles on the internet about defective equipment and poor service from Glacier Bay Marine Refrigeration. I recently installed a Glacier Bay refrigeration system in Voyager, and while I did have a problem with one of the components, the staff at Glacier Bay could not have been more helpful. They helped me diagnose the problem and replaced the component in a professional and timely manner. The component, the solenoid vlv assy that directs gas flow to either the freezer or refrigeration zones, may have been defective, or more likely, I managed to contaminate it during installation. Either way, kudos to Glacier Bay. And, best of all, the system works great! (so farÖ)

I do have to say though, I donít believe the installation of these systems is a do-it-yourself operation. The required vacuum pumps, gas detectors and the experience to operate these devices correctly is not in the realm of the average do-it-yourselfer.

Rick Goltz
S/V Voyager

dohenyboy 02-17-2007 07:26 AM

Had the same experience. The compressor was defective but they were very reactive in helping out. I got the artic air option and have not been able to get it to work yet




Quote:

Originally Posted by voyagersail
I’ve read several articles on the internet about defective equipment and poor service from Glacier Bay Marine Refrigeration. I recently installed a Glacier Bay refrigeration system in Voyager, and while I did have a problem with one of the components, the staff at Glacier Bay could not have been more helpful. They helped me diagnose the problem and replaced the component in a professional and timely manner. The component, the solenoid vlv assy that directs gas flow to either the freezer or refrigeration zones, may have been defective, or more likely, I managed to contaminate it during installation. Either way, kudos to Glacier Bay. And, best of all, the system works great! (so far…)

I do have to say though, I don’t believe the installation of these systems is a do-it-yourself operation. The required vacuum pumps, gas detectors and the experience to operate these devices correctly is not in the realm of the average do-it-yourselfer.

Rick Goltz
S/V Voyager


magi111 08-09-2011 05:31 AM

Your article was very informative to me really help to me..
Thanks for your sharing...!

Refrigeration Equipment


All times are GMT -4. The time now is 05:08 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012