SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Gear & Maintenance (http://www.sailnet.com/forums/gear-maintenance/)
-   -   Hatch Gasket (http://www.sailnet.com/forums/gear-maintenance/29874-hatch-gasket.html)

essman 03-03-2007 07:55 PM

Hatch Gasket
 
Have a 1983 Irwin 37. Need to replace the hatch gaskets. I cannot determine who made the hatches, there are no identifying markings that I can see. It appears that the gaskets were round at one time. About 3/8 inch diameter. Anybody found a source for round hatch gasket material? Can find plenty of "D" shaped gaskets, but no round ones. The hatch glass has a groove cut in it to accept the round gasket, plus the hatch body has a round track in it. Guess I could use D shaped gasket where the flat sides would meet, but the D shaped gasket material normally has 2 sided tape on the flat side for mounting. And, the existing gasket material is closed cell foam. I know somebody out there surely has replaced the hatch gaskets by now......


All times are GMT -4. The time now is 04:34 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012