Prism Polish

[JLBJR]

I knew Prism Polish was good for metals but two days ago I used it to refurbish my 30 year old lexan ports and the results were truly amazing. I went from thinking I was going to have to replace them, to thinking I now need privacy shades! Rubbed it on with my fingers and polished it off with paper towels. It could not have been easier! I am going to try it on the Gel Coat next. Check it out at http://www.mppros.com/metal01.htm


J

[Sailormann]

Spam Alert ! Spam Alert ! Cleanup In The Gear And Maintenance Aisle Please ! ! ! ! !

[Sapperwhite]

I used it to polish a dog turd once....the results were shitty

[tommyt]

Not really sure if this is Spam as I have not seen them do it before. They are based in Illinois and attend Strictly Sail shows and such.

I swear by the stuff. Cleans gelcoat, metals, etc.. Brings back the color on my SeaRay better than anything I have found, and I have tried most everything.

So, if it is spam, it is good spam at least.

[SailinJay]

You can polish a turd, but you can't make it shine.

[pegasus1457]

Originally Posted by SailinJay

You can polish a turd, but you can't make it shine.

But if you send it to Sailhog he'll turn it into a pumpkin pie ..

[JLBJR]

What the heck are you people talking about? Did I miss something? Are we not allowed to tell people about products that we find that work? I am not sending spam, I am sending what I thought was good information about a product I tried that worked and solved a problem. I spoke to the guy who invented the stuff at the Strictly Sail show in St. Petersburg today. Will someone please tell me what the problem with my post was?


JLBJR

[Sailormann]

Sorry - my fault. Did not recognise your handle and the post just sounded a little too perky and positive.

[JLBJR]

I’ll try to show less enthusiasm next time!

[stevjo]

I have used this product on my SS and had good results. I too am looking for a way to polish the Lexan so will give Prism a try. I have heard that Novus #3 Polish is a good bet for the Lexan also. While checking their site they indicate that paper towels will cause scratching and to use a soft cloth when polishing Lexan etc.

Thanks for the info.

Originally Posted by JLBJR

I knew Prism Polish was good for metals but two days ago I used it to refurbish my 30 year old lexan ports and the results were truly amazing. I went from thinking I was going to have to replace them, to thinking I now need privacy shades! Rubbed it on with my fingers and polished it off with paper towels. It could not have been easier! I am going to try it on the Gel Coat next. Check it out at

J