Bent Motor Mount
The other night it was blowing pretty good and I found myself pushed into the dock. As a result, my motor ended up catching a slip finger and bent my motor mount.
Anyone else out there brave enough to admit to doing this? Is it possible to bend/bang the motor mount back into shape?
The motor is still mounted securely, but I can't pull them motor out of the water with the new kink.
1989 Catalina 25 TR/FK
Haven't done this myself, and given the way my motor mounts, it would be fairly difficult to do so... but I would recommend you take the bracket off the boat and fix it. It should be relatively easy to fix once it is off the boat.
|All times are GMT -4. The time now is 03:47 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012