I'm preparing to make a new attachment on my mast, but I'd like a diagram of what's in there before I start drilling holes. Do you guys have any resources (diagrams) out there on mast construction?
I have an in-mast furler. Leading edge of mast in encased and houses halyards running inside up the length of the mast for head sails. Separate compartment to aft (opening to aft for sail and furling rod/hardware.)
If the mast is stock to the boat, call the manufacturer. If the mast as retro-fitted, call the spar manufacturer.
One place to look at various spar sections follows. not all inclusive but start.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
Sorry, off line for a while. My mast is not stock to the boat, but thanks for the direction to RigRite. I'll check them out. Marina just had a power outage and I need to shut down. Thanks, again.:D
|All times are GMT -4. The time now is 02:22 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012