SailNet is a forum community dedicated to Sailing enthusiasts. Come join the discussion about sailing, modifications, classifieds, troubleshooting, repairs, reviews, maintenance, and more!
I'm talking small here--all I need is a piece 5" x 3/8" x 3/8" to fix a broken teak door jamb to my head. If you have such a scrap and are willing to part with it, let me know.
I have plenty of scrap pieces left from projects. I would suspect however, that the postage (& handling) cost for me to ship it to you, would equal or exceed what you could buy it for locally.
T34C has a good recommendation - but if you have no luck, then PM me. What I have is the brownish color teak - not sure if it matches your door jamb.
Happen to have several thousand (well, hundreds anyway) available. Measure app. 1.5" X 8" X 1/2", several random lengths also available. Beautiful gray color, most already have at least one predrilled hole handy for attaching to almost anything. Pre-sealed on three sides with tough black sealant to keep water out. Just tell me how many you want, no minimum, you pay shipping from Anacortes. Hurry, going fast (to the dump).
Happen to have several thousand (well, hundreds anyway) available. Measure app. 1.5" X 8" X 1/2", several random lengths also available. Beautiful gray color, most already have at least one predrilled hole handy for attaching to almost anything. Pre-sealed on three sides with tough black sealant to keep water out. Just tell me how many you want, no minimum, you pay shipping from Anacortes. Hurry, going fast (to the dump).
In order to make it easier to pry the boards up we had to use a circular saw to cut them app. every 8" across the grain. It probably would have been a LOT easier if it had been 80F instead of 30-35F. We found it easier to pry each board up when it was cut, and easier to start the next from a clean cut end rather than the ragged, broken end left when it broke. It took 6 man days to remove the teak from our 40', thank the Gods it was only on the lower deck and not on the cabin tops as well. The good news: no core rot! Holes are now potted, deck ground down and almost ready to glass and non-skid. Few more weekends, couple hundred more dollars and we'll be done (HAH! in my dreams!). Actually we are hoping to splash her sometime in April.
John
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
SailNet Community
1.7M posts
173.8K members
Since 1990
A forum community dedicated to Sailing, boating, cruising, racing & chartering. Come join the discussion about sailing, destinations, maintenance, repairs, navigation, electronics, classifieds and more